If you want to become a serious panel maker,

http://cgi.ebay.com/72-3x6-Everbright-Solar-Cells-Panel-Kit-Clipped-Tabbed_W0QQitemZ110446635763QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item19b721eaf3

72 3x6 Everbright Solar Cells Panel Kit Clipped Tabbed

If you want to become a serious panel maker, buy a good soldering iron whose temperature can be adjusted. Don't get a cheap iron. It's one of the most important tools you need to have. If you can't buy an adjustable solder iron, get one that's rated at 90 watts. Also when you solder, all you need to do is to apply flux on the bus bars and the backside contacts before soldering. Do NOT scrape off the whitish substance on the bus bar or the backside square contacts. Those are made of silver and must be kept intact. Just apply flux and solder the tabbing wires. The wires are already coated with tin solder so you don't need to use extra solder AT ALL. Use a smooth and continuous motion to solder the wires onto the bus bars of the cells.